top of page

Create Your First Project

Start adding your projects to your portfolio. Click on "Manage Projects" to get started

What is Point Cloud Modeling?

Point cloud modeling is the process of converting points from a scan into a surface, mesh, or solid model. A point cloud is the raw, measured state of the area. Modeling is the process of extracting the geometry that goes into drawings and calculations from this raw state. A search for "point cloud modeling" asks for the model generated from the scan, not the finished scan itself.

Three types of deliverables are common. A mesh is a triangular surface covering the points. It's useful for visualization and organically shaped stonework. CAD surfaces and solid models convert walls, floors, pipes, and steel into measurable elements. A BIM model is the version where floor, space, and discipline information is added to this geometry. The steps to transitioning to BIM are explained on the Scan to BIM page.

What is it used for in practice? Cross-sections are taken from the model, quantities are calculated, and new constructions are fitted onto existing structures. The intersection of pipes and beams within a facility is visible in this geometry. Each user doesn't need to open millions of points. The point cloud on which the measurement is based is stored in the archive. Daily work is carried out using the model.

Who Seeks This? Queries for "point cloud modeling" and "point cloud modeling programs" come from architects, restoration offices, and facility operators. "Creating a 3D point cloud" is another common question. More important than the specific program is whether the file will be cross-sectional.

Important Notes: The model does not represent the entire point. During simplification, curved stone, thin profiles, and facility details may be lost. Which elements will be in the model and which will remain in the point cloud must be specified before starting the project. A model without coordinates will not match the existing drawing and project plans. A quality control report, including deviation calculations, is also superimposed onto the model. This is called 3D quality control.

KG Engineering delivers the scans we obtain with a Leica RTC360 as mesh, CAD, or BIM models, depending on the scope. The model and point cloud are kept at the same coordinates. Information: info@kgmuhendislik.com · (0536) 232 69 12 · (0541) 390 69 45

bottom of page